where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Eddyfi
Eddyfi Technologies provide the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivit ...
2222 views
Technical Discussions
Kaveh Edalati
Kaveh Edalati
00:35 Oct-12-2005
Criteria for selecting the DWSI or DWDI or Elliptical techniques in in-service pipes

Dear friends
Thank you for your comments on IQI selection in double wall radiography of pipes.
Now, I have two problems:
1- What are the criteria for selecting the radiography technique in double wall radiography of pipes?
In some standards such as ASTM and ASME, when pipe diameter is up to 89 mm, double wall and double image radiography technique shall be used.
But we can not see the clear criterion for selecting the elliptical technique in ASTM or ASME. In API if pipe diameter is up to 63 mm, elliptical should be used.

2- Another problem is maximum allowable source to film distance (SFD) in double wall single image radiography. For example, when minimum SFD is 120 and pipe diameter is 95 mm, what is the practical SFD?
Or, when minimum SFD is 140 and pipe diameter is 95 mm, what is the practical SFD? I think that if SFD is set to 140, the image of upper wall cause in decreasing image quality.
I look forward your comments.

Thank you,
Kaveh


 
 Reply 
 
Payam
Payam
05:36 Nov-02-2005
Re: Criteria for selecting the DWSI or DWDI or Elliptical techniques in in-service pipes
----------- Start Original Message -----------
: Dear friends
: Thank you for your comments on IQI selection in double wall radiography of pipes.
: Now, I have two problems:
: 1- What are the criteria for selecting the radiography technique in double wall radiography of pipes?
: In some standards such as ASTM and ASME, when pipe diameter is up to 89 mm, double wall and double image radiography technique shall be used.
: But we can not see the clear criterion for selecting the elliptical technique in ASTM or ASME. In API if pipe diameter is up to 63 mm, elliptical should be used.
: 2- Another problem is maximum allowable source to film distance (SFD) in double wall single image radiography. For example, when minimum SFD is 120 and pipe diameter is 95 mm, what is the practical SFD?
: Or, when minimum SFD is 140 and pipe diameter is 95 mm, what is the practical SFD? I think that if SFD is set to 140, the image of upper wall cause in decreasing image quality.
: I look forward your comments.
: Thank you,
: Kaveh
------------ End Original Message ------------

Hi Kaveh
As you wrote, there are some chalenge in this case. But you are free in many cases for technique selection in radiography according to your experience.
Payam



 
 Reply 
 
Houston
Houston
08:47 Nov-26-2006
Layne
5e6a9d3147aa


 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window