where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
528 views
Technical Discussions
Zeki Cosku Gokce
Zeki Cosku Gokce
04:48 Oct-31-2005
Ultrasonic inspection of as-cast products

What is the best wavemode, frequency, sensor diameter to look for longitudinal cracks and shroud porosity on as-cast products such as slabs and billets from a steel mill? we are trying to inspect a 150mm square billet but cannot see the backwall reflection (there seems to be a lot of scattering). Any ideas?


 
 Reply 
 
A.A.AMIRI
Consultant, NDT/QC/WELD INSPECTION
Iran, Joined Nov 2005, 20

A.A.AMIRI

Consultant, NDT/QC/WELD INSPECTION
Iran,
Joined Nov 2005
20
05:38 Nov-01-2005
Re: Ultrasonic inspection of as-cast products
----------- Start Original Message -----------
DEAR FRIEND,
I THINK FOR YOUR TEST CONDITION,NORMAL PROBE WITH OVER 24mm.Dia.(LONGITUDINAL WAVE),0.25-1 MHZ FREQUENCY IS
WELL.YOU CAN ON-REGECT SWITCH FOR OMITTED OR DECREASE NOISE ON DISPLAY(CRT/LCD).HIGH DAMP PROBE MAY HELP YOU
FOR PREVENT OF NOISE EFFECTS.


 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window