where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

431 views
Technical Discussions
John James
Self Employed, Australia, Joined Jun 2005, 3

John James

Self Employed,
Australia,
Joined Jun 2005
3
03:04 Dec-10-2005
Iris

I have heard that Shell in Houston(USA)offers Iris qualifications. Can any tell me anymore.

Regards
John


 
 Reply 
 
F.Buijsen
F.Buijsen
02:55 Dec-13-2005
Re: Iris
----------- Start Original Message -----------
: I have heard that Shell in Houston(USA)offers Iris qualifications. Can any tell me anymore.
: Regards
: John
------------ End Original Message ------------

TiaT europe bv in The Netherlands offers IRIS level 1 training. +31 165 552461


 
 Reply 
 
Jim Yukes
Jim Yukes
06:51 Jan-06-2006
Re: Iris
----------- Start Original Message -----------
: I have heard that Shell in Houston(USA)offers Iris qualifications. Can any tell me anymore.
: Regards
: John
------------ End Original Message ------------

I understand that Shell (USA) only qualifies IRIS technicians if they have an internal request from a Shell plant


 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window