where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
978 views
Technical Discussions
John James
Self Employed, Australia, Joined Jun 2005, 3

John James

Self Employed,
Australia,
Joined Jun 2005
3
04:51 Dec-22-2005
Automatic Eddy Curent Tube Inspection Analysis Software

Recently i have heard of several companies using automated analysis software for data analysis of ECT tube data.

Is there software like this in the market place? From my experience there is to many variables and scenarios i believe for effective and accurate software for this function.

Any comments

Regards



 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
03:35 Dec-23-2005
Re: Automatic Eddy Curent Tube Inspection Analysis Software

There have been many attempts at this over the years, I first came across the (then) purely amplitude based DRECT system, developed by the then CEGB in the UK, around 1980. This evolved through a number of iterations, and the current ARTIST system can probably be regarded as its heir.

In the USA a nummber of companies (particularly Zetec) have deveoped systems which can provide automated screening of tube results based on a wide range of evaluation algorithms nd criteria

That is the point. These systems should be regarded as a screening tool, They will tell you this tube is fine, and this one is scrap, but in between is a whole grey area, You have to be either very conservative or willing to manually evaluate a fair number of 'marginal' applications.

But these days you normally need to log all the data anyway, and the extra processing for the screening does not add too much of a cost or time overhead. By eliminating 'clean tubes' and identifying the critical indications you can save a lot of time, and reduce operator fatigue and error.

Well worth considering if you test a lot of tubes.

Joe


----------- Start Original Message -----------
: Recently i have heard of several companies using automated analysis software for data analysis of ECT tube data.
: Is there software like this in the market place? From my experience there is to many variables and scenarios i believe for effective and accurate software for this function.
: Any comments
: Regards
------------ End Original Message ------------




 
 Reply 
 
Franc Buijsen
Franc Buijsen
01:19 Dec-27-2005
Re: Automatic Eddy Curent Tube Inspection Analysis Software
----------- Start Original Message -----------
: Recently i have heard of several companies using automated analysis software for data analysis of ECT tube data.
: Is there software like this in the market place? From my experience there is to many variables and scenarios i believe for effective and accurate software for this function.
: Any comments
: Regards

Corestar in the US has very strong software for this application in combination with their Omni 100 or Omni 200 Eddy current system.

For more info you can contact me at +31 165 552461 or look on their web site.

Franc


------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window