where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

449 views
Technical Discussions
Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
04:03 Jan-20-2006
Barkhausen for Creep Damage

I would be interested in talking to anyone who has used Barkhausen Noise techniques for the early detection of creep damage in materials.

Can Barkhausen techniques be used successfully for non destructive evaluation of high grade stainless steels (e.g. hastelloy, 1.4435 etc?)


 
 Reply 
 
Changqing Lee
Changqing Lee
03:29 Jan-24-2006
Re: Barkhausen for Creep Damage
I found one paper on this topic. I hope this helps.

Title:
Modeling incipient creep damage effects on Barkhausen noise and magnetoacoustic emission

Authors:
Sablik, M. J.; Augustyniak, B.; Piotrowski, L.

Affiliation:
AA(Southwest Research Institute, P.O.Drawer 28510, 6220 Culebra Road, San Antonio, TX 78228-0510, USA; msablik@swri.org), AB(Physics Department, Technical University of Gdansk, ul. Narutowicza 11/12, Gdansk PL-80-952, Poland), AC(Physics Department, Technical University of Gdansk, ul. Narutowicza 11/12, Gdansk PL-80-952, Poland)

Journal:
Journal of Magnetism and Magnetic Materials, Volume 272, p. E523-E525.

Publication Date:
05/2004

----------- Start Original Message -----------
: I would be interested in talking to anyone who has used Barkhausen Noise techniques for the early detection of creep damage in materials.
: Can Barkhausen techniques be used successfully for non destructive evaluation of high grade stainless steels (e.g. hastelloy, 1.4435 etc?)
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window