where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ZETEC, Inc.
Zetec is a global leader in nondestructive testing (NDT) solutions for the critical inspection needs of industries the world counts on every day, ...
871 views
Technical Discussions
prakash
prakash
04:59 Jan-21-2006
NDT of fastner head

can the head of a fastner be tested for crack after forging using some NDT method? If so how?


 
 Reply 
 
P V SASTRY
P V SASTRY
00:15 Jan-22-2006
Re: NDT of fastner head
----------- Start Original Message -----------
: can the head of a fastner be tested for crack after forging using some NDT method? If so how?
------------ End Original Message ------------
They can be very easily tested for the presence of cracks/bursts using wet fluorescent magnetic particle testing(WFMPT),assuming that the fasteners are of ferromagnetic material. This is a fast and reliable method that will detect cracks of even a few microns width when properly applied. Alternately Dye Penetrant testing(PT) also can be used as a stop gap arrangement before you can procure the preffered WFMPT set up.In case the fastners are of non ferromagnetic materials like SS, PT (colour/fluorescent)can only be aplied.



 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
06:05 Jan-23-2006
Re: NDT of fastner head
----------- Start Original Message -----------
: can the head of a fastner be tested for crack after forging using some NDT method? If so how?
------------ End Original Message ------------

Dear Prakash,

Yes, there are several options. Magnetic Particle Testing is one (I am assuming that the fastener is magnetic). If you need real time high speed testing, you should think of automated UT and or RT. If you can accept batch testing mode, MT and PT (if non-magnetic material is invoved) may be good enough.

Swamy

Swamy



 
 Reply 
 

Product Spotlight

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window