where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Materials Research Institute
Consulting to the NDT industry.
461 views
Technical Discussions
Sami Rizkalla
Sami Rizkalla
03:24 Jun-25-1999
needed NDT Ph.D. metallurgy


Immediate Opening
We are looking for some one with Ph.D. in metallurgy to supervise and prepare report for Petrochemical Vessels in Mexico for:
Eddy Current
Hardness
Metallographic Replica

Please send resume and hourly rate. Reply by e-mail or Fax: (732) 888-6180




 
 Reply 
 
AKSHT AGRAWAL
AKSHT AGRAWAL
07:36 Jun-25-1999
Re: needed NDT Ph.D. metallurgy

This is with reference to your advertisement on the web site "ndt.net" for NDT engineer.

I have done M.Tech in Metallurgical Engineering and Material Science from Indian Institute of Technology, Kanpur. For the last three years serving in the Indian Oil Corpn. Ltd. as Inspection Engineer. My job involves health monitoring of all static equipment and quality control of piping fabricattion job. I have done Radiography Testing Level-II course.

My bio-data is enclosed for your kind perusal. Please let me know if you have any suitable post for me.

Thanking you,


AKSHAT AGRAWAL
14/20 PO Jawaharnagar
GUJARAT REFINERY TOWNSHIP
VADODARA-391 320
INDIA

Ph. no. : 0265-306344


_______________________________________________________

RESUME

Name : Akshat Agrawal

Father's Name : (Late) Shri Sushil Kumar Agrawal

Date of Birth (Age) : 8th August, 1971 ( 27 years)

Permanent Address : 14/20, Gujarat Refinery Township
Jawaharnagar, Vadodara - 391 320

Nationality : Indian

Language known : Hindi, English

Marital Status : Married

Passport No. : S 741003 valid up to 15/07/2005

Educational Qualification
--------------------------------------------
Degree Institution Period CGPA*
--------------------------------------------
B Tech (Metallurgy) IT-Banaras Hindu University 1990-94 6.0 / 10.0
M Tech (Metallurgy IIT - Kanpur 1994-96 8.7 / 10.0
& Material Science)
--------------------------------------------
* CGPA - Cumulative Grade Point Average

B Tech Thesis : Design of wear testing machine and wear characteristics of Al-Si alloy.
M Tech Thesis : Ageing characteristics of 17-7 precipitation hardening stainless steel.

VOCATIONAL TRAINING
--------------------------------------------
Organization Duration Shop
--------------------------------------------
HAL (Bangalore) 30 days Foundry and Forge division
SAIL (Bokaro) 25 days Steel Melting Shop - II
LML (Kanpur) 30 days Welding, Heat treatment and
pressure die casting shops
--------------------------------------------

JOB PROFILE
--------------------------------------------
ORGANISATION DATE OF JOINING DESIGNATION
--------------------------------------------
Gujarat Refinery, 20 /09 / 96 INSPECTION ENGINEER
P.O Jawaharnagar,
IOCL, Vadodara-391 320
--------------------------------------------

PROFESSIONAL EXPERIENCE

* Corrosion problem and material selection in refinery and petro-chemical industries.
* Inspection of Feed Preparation Unit-II, Sulfur Recovery Unit & Primary Distillation Unit.
* Health monitoring and repair of static equipment - Furnaces, Pressure vessels, Columns, Heat exchangers & Tanks.
* Familiarity with inspection codes and standards(ASTM, ASME, API, ISI).
* Material identification and testing.
* QA/ QC of piping fabrication jobs.

COMPUTER SKILLS

* Conversant with MS Office and AutoCAD.

PROFESSIONAL COURSES
--------------------------------------------
SUBJECT ORGANISATION/ INSTITUTION DURATION (DAYS)
--------------------------------------------
Radiography Bhabha Atomic Research Center 30
Testing Level-II Mumbai

Corrosion in Electrical Research &Development 3
Process Industries Association , Vadodara

Fractography and Indian Institute of Technology 3
Failure Analysis Mumbai

ISO 9002 & ISO 14001 Gujarat Refinery , Vadodara 2
Awareness course

Welding Qualification ADOR Institute of Welding 3
& Records Technology, Mumbai

HRSG - Design & Bharat Heavy Electrical Ltd. , 5
Operation Trichurapalli
-------------------------------------------------


(AKSHAT AGRAWAL)




 
 Reply 
 
pejman keshmiry
pejman keshmiry
00:36 Nov-17-1999
Re: needed NDT Ph.D. metallurgy

: This is with reference to your advertisement on the web site "ndt.net" for NDT engineer.

: I have done M.Tech in Metallurgical Engineering and Material Science from Indian Institute of Technology, Kanpur. For the last three years serving in the Indian Oil Corpn. Ltd. as Inspection Engineer. My job involves health monitoring of all static equipment and quality control of piping fabricattion job. I have done Radiography Testing Level-II course.

: My bio-data is enclosed for your kind perusal. Please let me know if you have any suitable post for me.

: Thanking you,

:
: AKSHAT AGRAWAL
: 14/20 PO Jawaharnagar
: GUJARAT REFINERY TOWNSHIP
: VADODARA-391 320
: INDIA

: Ph. no. : 0265-306344

:
: _______________________________________________________

: RESUME

: Name : Akshat Agrawal

: Father's Name : (Late) Shri Sushil Kumar Agrawal

: Date of Birth (Age) : 8th August, 1971 ( 27 years)

: Permanent Address : 14/20, Gujarat Refinery Township
: Jawaharnagar, Vadodara - 391 320

: Nationality : Indian

: Language known : Hindi, English

: Marital Status : Married

: Passport No. : S 741003 valid up to 15/07/2005

: Educational Qualification
: --------------------------------------------
: Degree Institution Period CGPA*
: --------------------------------------------
: B Tech (Metallurgy) IT-Banaras Hindu University 1990-94 6.0 / 10.0
: M Tech (Metallurgy IIT - Kanpur 1994-96 8.7 / 10.0
: & Material Science)
: --------------------------------------------
: * CGPA - Cumulative Grade Point Average

: B Tech Thesis : Design of wear testing machine and wear characteristics of Al-Si alloy.
: M Tech Thesis : Ageing characteristics of 17-7 precipitation hardening stainless steel.

: VOCATIONAL TRAINING
: --------------------------------------------
: Organization Duration Shop
: --------------------------------------------
: HAL (Bangalore) 30 days Foundry and Forge division
: SAIL (Bokaro) 25 days Steel Melting Shop - II
: LML (Kanpur) 30 days Welding, Heat treatment and
: pressure die casting shops
: --------------------------------------------

: JOB PROFILE
: --------------------------------------------
: ORGANISATION DATE OF JOINING DESIGNATION
: --------------------------------------------
: Gujarat Refinery, 20 /09 / 96 INSPECTION ENGINEER
: P.O Jawaharnagar,
: IOCL, Vadodara-391 320
: --------------------------------------------

: PROFESSIONAL EXPERIENCE

: * Corrosion problem and material selection in refinery and petro-chemical industries.
: * Inspection of Feed Preparation Unit-II, Sulfur Recovery Unit & Primary Distillation Unit.
: * Health monitoring and repair of static equipment - Furnaces, Pressure vessels, Columns, Heat exchangers & Tanks.
: * Familiarity with inspection codes and standards (ASTM, ASME, API, ISI).
: * Material identification and testing.
: * QA/ QC of piping fabrication jobs.

: COMPUTER SKILLS

: * Conversant with MS Office and AutoCAD.
:
: PROFESSIONAL COURSES
: --------------------------------------------
: SUBJECT ORGANISATION/ INSTITUTION DURATION (DAYS)
: --------------------------------------------
: Radiography Bhabha Atomic Research Center 30
: Testing Level-II Mumbai

: Corrosion in Electrical Research &Development 3
: Process Industries Association , Vadodara

: Fractography and Indian Institute of Technology 3
: Failure Analysis Mumbai

: ISO 9002 & ISO 14001 Gujarat Refinery , Vadodara 2
: Awareness course

: Welding Qualification ADOR Institute of Welding 3
: & Records Technology, Mumbai

: HRSG - Design & Bharat Heavy Electrical Ltd. , 5
: Operation Trichurapalli
: -------------------------------------------------
:

:
: (AKSHAT AGRAWAL)




 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

New PHAsis module for longitudinal weld seam inspection

PHAsis® Phased Array manual ultrasonic spot weld inspection device is now ideally suited for test
...
ing of longitudinally welded seams (e.g. Arplas® seam, short line seams) with a length of 3 to 12 mm.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window