where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

747 views
Technical Discussions
Scott
Scott
03:52 Feb-22-2006
High Temp Liq. Pen (Nuclear)

Does anyone know of any high temperature liquid penetrant chemicals that are certified for use on nuclear components?

Basically if they meet ASME section V for sulfer and halogen content then they are ok for nuclear.

Anyone know????


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
03:34 Feb-26-2006
Re: High Temp Liq. Pen (Nuclear)
Dear Scott,

How high do you want to go?

Swamy

----------- Start Original Message -----------
: Does anyone know of any high temperature liquid penetrant chemicals that are certified for use on nuclear components?
: Basically if they meet ASME section V for sulfer and halogen content then they are ok for nuclear.
: Anyone know????
------------ End Original Message ------------




 
 Reply 
 
Scott
Scott
09:31 Mar-02-2006
Re: High Temp Liq. Pen (Nuclear)
I see flash point of most high temp penetrants is 200 deg C, that would be fine.

Do you know of any accepted for nuclear use?


----------- Start Original Message -----------
: Dear Scott,
: How high do you want to go?
: Swamy
: : Does anyone know of any high temperature liquid penetrant chemicals that are certified for use on nuclear components?
: : Basically if they meet ASME section V for sulfer and halogen content then they are ok for nuclear.
: : Anyone know????
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window