where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

748 views
Technical Discussions
Scott
Scott
03:52 Feb-22-2006
High Temp Liq. Pen (Nuclear)

Does anyone know of any high temperature liquid penetrant chemicals that are certified for use on nuclear components?

Basically if they meet ASME section V for sulfer and halogen content then they are ok for nuclear.

Anyone know????


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
03:34 Feb-26-2006
Re: High Temp Liq. Pen (Nuclear)
Dear Scott,

How high do you want to go?

Swamy

----------- Start Original Message -----------
: Does anyone know of any high temperature liquid penetrant chemicals that are certified for use on nuclear components?
: Basically if they meet ASME section V for sulfer and halogen content then they are ok for nuclear.
: Anyone know????
------------ End Original Message ------------




 
 Reply 
 
Scott
Scott
09:31 Mar-02-2006
Re: High Temp Liq. Pen (Nuclear)
I see flash point of most high temp penetrants is 200 deg C, that would be fine.

Do you know of any accepted for nuclear use?


----------- Start Original Message -----------
: Dear Scott,
: How high do you want to go?
: Swamy
: : Does anyone know of any high temperature liquid penetrant chemicals that are certified for use on nuclear components?
: : Basically if they meet ASME section V for sulfer and halogen content then they are ok for nuclear.
: : Anyone know????
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window