where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Teletest
Teletest Focus+ was the first system to use long-range guided wave ultrasonic testing to detect corrosion in pipelines.
661 views
Technical Discussions
David Harvey
David Harvey
01:31 Mar-15-2006
EMAT in High temp Zr

I am interested in measuring the thickness, up to about 1", in hot zirconium (up to 400C). Is this possible?


 
 Reply 
 
Mark Potter
R & D
Sonemat Ltd., United Kingdom, Joined Sep 2007, 7

Mark Potter

R & D
Sonemat Ltd.,
United Kingdom,
Joined Sep 2007
7
08:05 Mar-16-2006
Re: EMAT in High temp Zr
I have not heard of anyone using an EMAT on Zirconium; I dont think it is conductive enough. I could be wrong though ... anyone else heard of EMATs in this application?

(The temperature is probably less of an issue)

Depending on its attenuation you could use a laser-laser system, but that will cost lots of monies.

Mark.




 
 Reply 
 
Jaromir Amadeus Masa, PhD
Jaromir Amadeus Masa, PhD
09:16 Mar-17-2006
Re: EMAT in High temp Zr
I shall try to find something more in the literature.
About UT I read

Zirkon und Hafnium für die Kerntechnik Interesse gefunden. Sie werden bereits bei der Herstellung von Gussblock an geprüft. Zirkonblöcke mit 0,3 m Durchmesser und über 1 m Länge prüft man an der mechanisch bearbeiteten Oberfläche von Hand bei 1 MHz, am besten mit SE-Prüfköpfen, um auch Fehler nahe der Oberfläche zu finden von Hand bei 1 MHz [siehe Fink, E. W.; Ultrasonic testing as a Method of determining variables in processing Zircalloy and Hafnium. Symposium NDT of the nuclear Energy, ASTM spec. Tech. Publ. No. 223 [1958] 175-179; und Wood, F. J.; Borg, J. O.; Ultrasonic inspection of arc-èást zirconium and its alloys. US Bureau of Mines, Rep. of Investigation 5126, March 1955.
Krautkrämer, Krautkrämer, Werkstoffprüfung mit Ultraschall, Springer Berlin 1986 (5. Auflage), S.556

Jaromir Amadeus Máša, PhD
Starmans Electronics Ltd, Prague


----------- Start Original Message -----------
: I am interested in measuring the thickness, up to about 1", in hot zirconium (up to 400C). Is this possible?
------------ End Original Message ------------




 
 Reply 
 
Changqing Lee
Changqing Lee
05:52 Mar-18-2006
Re: EMAT in High temp Zr
Hi, David,

Why dont you try with Radiographic method?

Even though I dont have experience with Zircoium, it seems to be an easy task for radiographic thickness gauge.

By the way, I checked the electrical conductivity of zirconium, 4~5% IACS at room temp.

----------- Start Original Message -----------
: I am interested in measuring the thickness, up to about 1", in hot zirconium (up to 400C). Is this possible?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window