where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1243 views
Technical Discussions
Amry Amin
R & D
Malaysian Inst. for Nuclear Technology Research, Malaysia, Joined Aug 2002, 4

Amry Amin

R & D
Malaysian Inst. for Nuclear Technology Research,
Malaysia,
Joined Aug 2002
4
09:14 Sep-30-2004
Utrasonic probe assessment

Hi everybody,

Besides than ASTM E1065, does anyone knows of standards or procedures of assessing UT probes. Can anyone help.


 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
02:42 Sep-30-2004
Re: Utrasonic probe assessment
Hello,

please take a look at
European Standard EN 12668-2
Nondestructive Testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes

Kind reards



 
 Reply 
 
M.Margolin
M.Margolin
06:23 Apr-20-2006
Testing a temporal resolution
----------- Start Original Message -----------
Which generator to use in EN 12668 # 8.4.7?
What are the waveforms for these measurements?

Regards,

M.Margolin


 
 Reply 
 
Khairul
Khairul
10:34 Jun-28-2011
Re: Utrasonic probe assessment
In Reply to Udo Schlengermann at 02:42 Sep-30-2004 .

Hello all,Any idea where i can sent my UT probe for calibration service as per EN 12668-1 requirement

 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
10:47 Jun-30-2011
Re: Utrasonic probe assessment
In Reply to Khairul at 10:34 Jun-28-2011 .

Dear colleagues,
there must be a misunderstanding:

Ultrasonic probes are covered by EN 12668-2 (not by part 1 which is for ultrasonic isntruments only).

Periodical checks are only required for instruments (part 1), not for probes (part 2).

Best regards

Udo Schlengermann

 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window