where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1823 views
Technical Discussions
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
08:29 May-16-2006
Wiring diagram for Magnaflux Model KCH-3D 1957

Hi,

I'm looking to modify my cable unit and require a wiring diagram for the following equipment.

Magnaflux Model KCH-3D
USAF Stock # 7CAD-444500
220 /440 Volts 60 cycles
Max Line Amp 200 / 100

Date of manufacture September 1957 (it's still in new condition!)

Any help would be most appreciated.

DH


    
 
 Reply 
 
Nick
Nick
16:30 Mar-20-2013
Re: Wiring diagram for Magnaflux Model KCH-3D 1957
In Reply to David Hermanutz at 08:29 May-16-2006 (Opening).

Download

A long time later, but here is the diagram for anyone else who is looking for it
    
 
 Reply 
 
Albert
Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation, USA, Joined Jun 2012, 140

Albert

Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation,
USA,
Joined Jun 2012
140
21:34 Mar-22-2013
Re: Wiring diagram for Magnaflux Model KCH-3D 1957
In Reply to Nick at 16:30 Mar-20-2013 .

Also, i have emailed Magnaflux and was able to get wiring diagrams from them with very little trouble.

    
 
 Reply 
 

Product Spotlight

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window