where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1260 views
Technical Discussions
Ranjeet singh
Ranjeet singh
05:48 May-24-2006
Differance between Ferrite magnetic permeability

I would like to know expert views about the differance between magnetic permeability and ferrite measurment.
Are they same ?

thanks


 
 Reply 
 
Linas Svilanis
R & D,
Kaunas University of Technology, Lithuania, Joined Nov 1998, 67

Linas Svilanis

R & D,
Kaunas University of Technology,
Lithuania,
Joined Nov 1998
67
01:32 May-26-2006
Re: Differance between Ferrite magnetic permeability
----------- Start Original Message -----------
: I would like to know expert views about the differance between magnetic permeability and ferrite measurment.
: Are they same ?
: thanks
------------ End Original Message ------------

Magnetic permeability is the parameter related to magnetic properties of the material.
Ferrite is the material.
You are asking to compare apples and melons.

Most probably you are concerned about magnetic permeability of ferrite compared to other materials.
Yes, ferrite u will be the highes. But also will exhibit the highes hysteresis. That is, u will be nonlinear function of field strength.
u is usually measured as complex value (see complex permeability), to take all the material electromagnetic interaction into account


 
 Reply 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 161

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
161
02:53 May-30-2006
Re: Differance between Ferrite magnetic permeability
----------- Start Original Message -----------
: : I would like to know expert views about the differance between magnetic permeability and ferrite measurment.
: : Are they same ?
: : thanks
: Magnetic permeability is the parameter related to magnetic properties of the material.
: Ferrite is the material.
: You are asking to compare apples and melons.
: Most probably you are concerned about magnetic permeability of ferrite compared to other materials.
: Yes, ferrite u will be the highes. But also will exhibit the highes hysteresis. That is, u will be nonlinear function of field strength.
: u is usually measured as complex value (see complex permeability), to take all the material electromagnetic interaction into account
------------ End Original Message ------------

Instruments that are sold for measurement of delta ferrite content actually do measure variations in magnetic permeability. The standards used to calibrate them have their ferrite content determined by metallographic examination. The reason they are called ferrite meters is probably just because ferrite content is the most likely cause of permeability variations is the objects usually tested. This type of instrument is often more useful for testing actual welds or parts than an instrument made to measure magnetic permability of low-permability materials with greater accuracy. The latter have larger probes and require specific sample size, thickness and flatness for highly accurate readings. I have compared both of these types of instruments, a pendulum-type ferrite indicator that "brackets" a sample between two references, and an eddy current tester for a couple of applications. They all agreed with each other for sorting a set of samples with similar geometry.



 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window