where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Waygate Technologies
Waygate Technologies, a Baker Hughes business (formerly GE Inspection Technologies), is an industrial inspection solutions company and the world ...
553 views
Technical Discussions
wave
wave
08:08 May-31-2006
ask

Whoever can explain "Edge effect" in eddy current inspection for me?


 
 Reply 
 
Jeff Medford
NDT Inspector
Nucor Steel, USA, Joined Apr 2005, 6

Jeff Medford

NDT Inspector
Nucor Steel,
USA,
Joined Apr 2005
6
08:32 Jun-06-2006
Re: ask
It very basic!!! As you get closer to the edge of a test material you eddy current field is compressed in turn increasing your resisitance. In turn that effects your impedence point. Simple. I have performed numerous inspection while having some sort of edge effect. It is no where written that is a follow practice but it is done. As long as you know the effects playing on your inspection. Your good. Just kidding stick to the proceedures and you can go wrong

----------- Start Original Message -----------
: Whoever can explain "Edge effect" in eddy current inspection for me?
------------ End Original Message ------------




 
 Reply 
 
Thomas Murphy
NDT Inspector
USA, Joined Jul 2000, 16

Thomas Murphy

NDT Inspector
USA,
Joined Jul 2000
16
05:23 Jun-08-2006
Re: ask
Is this really true? I would think that the inductive reactance would increase, increasing the impedance. Maybe someone could tell me why I am wrong. The coil parameters are presumed not to have changed. Any help would be appreciated.
Tom

----------- Start Original Message -----------
: It very basic!!! As you get closer to the edge of a test material you eddy current field is compressed in turn increasing your resisitance. In turn that effects your impedence point. Simple. I have performed numerous inspection while having some sort of edge effect. It is no where written that is a follow practice but it is done. As long as you know the effects playing on your inspection. Your good. Just kidding stick to the proceedures and you can go wrong
: : Whoever can explain "Edge effect" in eddy current inspection for me?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window