where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
551 views
Technical Discussions
wave
wave
08:08 May-31-2006
ask

Whoever can explain "Edge effect" in eddy current inspection for me?


 
 Reply 
 
Jeff Medford
NDT Inspector
Nucor Steel, USA, Joined Apr 2005, 6

Jeff Medford

NDT Inspector
Nucor Steel,
USA,
Joined Apr 2005
6
08:32 Jun-06-2006
Re: ask
It very basic!!! As you get closer to the edge of a test material you eddy current field is compressed in turn increasing your resisitance. In turn that effects your impedence point. Simple. I have performed numerous inspection while having some sort of edge effect. It is no where written that is a follow practice but it is done. As long as you know the effects playing on your inspection. Your good. Just kidding stick to the proceedures and you can go wrong

----------- Start Original Message -----------
: Whoever can explain "Edge effect" in eddy current inspection for me?
------------ End Original Message ------------




 
 Reply 
 
Thomas Murphy
NDT Inspector
USA, Joined Jul 2000, 16

Thomas Murphy

NDT Inspector
USA,
Joined Jul 2000
16
05:23 Jun-08-2006
Re: ask
Is this really true? I would think that the inductive reactance would increase, increasing the impedance. Maybe someone could tell me why I am wrong. The coil parameters are presumed not to have changed. Any help would be appreciated.
Tom

----------- Start Original Message -----------
: It very basic!!! As you get closer to the edge of a test material you eddy current field is compressed in turn increasing your resisitance. In turn that effects your impedence point. Simple. I have performed numerous inspection while having some sort of edge effect. It is no where written that is a follow practice but it is done. As long as you know the effects playing on your inspection. Your good. Just kidding stick to the proceedures and you can go wrong
: : Whoever can explain "Edge effect" in eddy current inspection for me?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window