where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Teletest
Teletest Focus+ was the first system to use long-range guided wave ultrasonic testing to detect corrosion in pipelines.
863 views
Technical Discussions
Azhar Jamil
Engineering, NDT Mechanical Engineer
Pakistan, Joined Feb 2005, 3

Azhar Jamil

Engineering, NDT Mechanical Engineer
Pakistan,
Joined Feb 2005
3
07:58 May-26-2006
Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit


We are using the Current Flow Magnetic Particle Inspection Unit. Its re-calibration is overdue and we want to re-calibrate it. Can anyone guide me how to re-calibrate (in-house) or help me in developing the re-calibration procedure.
We have some other equipment as digital fiield strength indicator which is calibrated, may be it will help us.

Thanks & Regards


 
 Reply 
 
Nigel
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
06:59 May-27-2006
Re: Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit
Jamil

Calibration of the Emcol unit will primarily be to verify the accuacy of the mounted ammeters, so you will need someone who can check their accuracy back to National Standards. For the magnetic flux function which ia a %age, no calibration is feasible, just a function test. Best bet is to find an approved calibration authority in your area.

Hope this helps. Nigel

----------- Start Original Message -----------
:
: We are using the Current Flow Magnetic Particle Inspection Unit. Its re-calibration is overdue and we want to re-calibrate it. Can anyone guide me how to re-calibrate (in-house) or help me in developing the re-calibration procedure.
: We have some other equipment as digital fiield strength indicator which is calibrated, may be it will help us.
: Thanks & Regards
------------ End Original Message ------------




 
 Reply 
 
mandar vinze
Engineering, manufacturer
magnafield controls, India, Joined May 2006, 3

mandar vinze

Engineering, manufacturer
magnafield controls,
India,
Joined May 2006
3
02:51 Jun-07-2006
Re: Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit
we are manufacturers of M T equipment and would be glad to help you in any matter relating to equipment,accesories ,calliberation service etc.We are in India and are in this for more than 30 yrs----------- Start Original Message -----------
: Jamil
: Calibration of the Emcol unit will primarily be to verify the accuacy of the mounted ammeters, so you will need someone who can check their accuracy back to National Standards. For the magnetic flux function which ia a %age, no calibration is feasible, just a function test. Best bet is to find an approved calibration authority in your area.
: Hope this helps. Nigel
: :
: : We are using the Current Flow Magnetic Particle Inspection Unit. Its re-calibration is overdue and we want to re-calibrate it. Can anyone guide me how to re-calibrate (in-house) or help me in developing the re-calibration procedure.
: : We have some other equipment as digital fiield strength indicator which is calibrated, may be it will help us.
: : Thanks & Regards
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window