where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

894 views
Technical Discussions
a.chagas
Other, QC SUPERVISOR
GE - Setubal, Portugal, Joined Oct 1999, 1

a.chagas

Other, QC SUPERVISOR
GE - Setubal,
Portugal,
Joined Oct 1999
1
01:18 Jul-09-1999
A problem with Magnetic Testing

Hi,
On welding of tube, 5ox5mm with two differents materials (SA213T91 and SA213T22)we have a linear indication (longitudinal),from Magnetic Testing.
Can you give us an explanation, about the origin of this problem?
Best regards, waiting for solution to this problem.


 
 Reply 
 
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 141

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
141
09:41 Jul-09-1999
Re: A problem with Magnetic Testing
Hi,
On welding of tube, 5ox5mm with two different materials (SA213T91 and SA213T22)we have a linear indication (longitudinal),from Magnetic Testing.
Can you give us an explanation, about the origin of this problem?
Best regards, waiting for solution to this problem.


This can be quite a common problem if there is a significant permeability difference between the two steels. What you are most likely seeing is the flux leakage occurring at the permeability change

Michael Trinidad
ETRS NDT Project Supervisor
KBJV Worsley Expansion Project
Direct Tel: 61-8-9781-6232
Fax: 61-8-9781-6233
Email: etrs@kbjv.com




 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
04:13 Jul-11-1999
Re: A problem with Magnetic Testing
: Hi,
: On welding of tube, 5ox5mm with two different materials (SA213T91 and SA213T22)we have a linear indication (longitudinal),from Magnetic Testing.
: Can you give us an explanation, about the origin of this problem?
: Best regards, waiting for solution to this problem.

:
: This can be quite a common problem if there is a significant permeability difference between the two steels. What you are most likely seeing is the flux leakage occurring at the permeability change

: Michael Trinidad
: ETRS NDT Project Supervisor
: KBJV Worsley Expansion Project
: Direct Tel: 61-8-9781-6232
: Fax: 61-8-9781-6233
: Email: etrs@kbjv.com

It is best to follow up such indications with a dye penetrant procedure to determine the absence of a weld defect.
Or switch to a non magnetic surface test procedure.
In one instance I came across a faulty weld procedure after doing a PMI out of curiosity of such an indication.
148 cut outs and 26 pups later the problem was corrected... (six day overrun on a shutdown due to one typo)

David Hermanutz
Pilbara NDT
Melbourne, Australia





 
 Reply 
 

Product Spotlight

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window