where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

831 views
Technical Discussions
CAMERON
CAMERON
02:51 Jul-12-2006
CALIBRATION OF SHEAR WAVES ON A USM 25

PLEASE HELP TO TO LEARN HOW TO CALIBRATE THE USM 25


 
 Reply 
 
David
David
02:13 Jul-14-2006
Re: CALIBRATION OF SHEAR WAVES ON A USM 25
----------- Start Original Message -----------
: PLEASE HELP TO TO LEARN HOW TO CALIBRATE THE USM 25
------------ End Original Message ------------

Try reading the manual, they usually have a section on basic calibration.
Calibration specifics depend on the type of probe and blocks you have and the intended application.
Best way is to attend training course as calibration is only the start, if you intend doing some useful work you need to get some guidance.
Thats why certification schemes call for record of training and experience under guidance.
Like most things, its not really as simple as experienced technicians make it look.


 
 Reply 
 
Roberto Falconio
Engineering, NDT/Metrology SUPERVISOR
El Salvador, Joined Feb 2000, 13

Roberto Falconio

Engineering, NDT/Metrology SUPERVISOR
El Salvador,
Joined Feb 2000
13
03:01 Jul-14-2006
Re: CALIBRATION OF SHEAR WAVES ON A USM 25
----------- Start Original Message -----------
: PLEASE HELP TO TO LEARN HOW TO CALIBRATE THE USM 25
------------ End Original Message ------------

Hi Cameron, USM 25 is a very nice piece of equipment, go to CAL functions, If you are using staight beam, introduce Reference echo 1 and echo 2 as the distance matching 2 consecutives back wall reflection on you standard block, you may use the first back wall and the second back wall reflections, lets do it simple, imagine you have a 10 mm thick cal block if it is steel go to the base menu and introduce a velocity similar to the steel normally this equipment will handle 5920 m/s, then go to CAL and with the transduer on the block identify both fist and second back wall reflections, introduce REF 1 as 10 mm and REF 2 as 20 mm position he gate on echo 1 (first back wall reflection) then press copy and a message echo 1 is recorded will be displyed and then on do the same on echo 2 (second back wall reflection), the equipmente will automatically calculate the velocity and the P delay.
you can do the same with an angle beam block but keep in mind that velocity should be around the half of 5920 m/s and echoes to select should be 25 mm and 100 mm with a range of 250 mm. once the equipment is calibrated you may change the range without disturbing the calibratio
if you have more question write me
good luck and best regards!
Roberto Falconio
ASNT NDT level III Reg 105293
AEROMAN TACA


 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window