where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1093 views
Technical Discussions
Athanassios Gkiokas
NDT Inspector, Consultant (Level 3)
NDT TECHNOLOGY, Greece, Joined Aug 2001, 2

Athanassios Gkiokas

NDT Inspector, Consultant (Level 3)
NDT TECHNOLOGY,
Greece,
Joined Aug 2001
2
08:19 Apr-02-2003
Chemical Composition of P18 steel according to ISO9328-4:1991

Does anybody knows the chemical composition of P18 steel plates according to ISO9328-4:1991?


 
 Reply 
 
mohamed saleh
mohamed saleh
07:55 May-25-2003
Re: Chemical Composition of P18 steel according to ISO9328-4:1991
: Does anybody knows the chemical composition of P18 steel plates according to ISO9328-4:1991?
.ASTM A325M



 
 Reply 
 
Tran Van Thap
Tran Van Thap
06:53 Jul-11-2005
Re: Chemical Composition of P18 steel according to ISO9328-4:1991
: : Does anybody knows the chemical composition of P18 steel plates according to ISO9328-4:1991?
: .ASTM A325M
.
Dear Sir/ Madam,
We are a company from Vietnam,
Now we are practicing alot of cutting equipments, so if you have a kind let we kmow :
-Description your P18 steel chemical composition.
-Price
-Method to buy.
Thanks and best regard!
Tran Van Thap.
Vice Director,
Applied Electricity - Mehanics and Informatics Company.
LeKatek Co.,Ltd
201 Nguyen Khang, Yen Hoa ward, Cau Giay Dist.,Hanoi, Vietnam.
Tel: +84 4 7848789.
Fax: +84 4 7848401.
Email: lekatek@vnn.vn



 
 Reply 
 
tranvanthap
tranvanthap
06:10 Jul-26-2006
Re: Chemical Composition of P18 steel according to ISO9328-4:1991
----------- Start Original Message -----------
: : : Does anybody knows the chemical composition of P18


 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window