where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
408 views
Technical Discussions
jagadish
NDT Inspector
heisco, Kuwait, Joined Aug 2006, 7

jagadish

NDT Inspector
heisco,
Kuwait,
Joined Aug 2006
7
01:22 Aug-22-2006
light or black image B

I thank you for the clarification of my query regarding backscatter radiation.Is the dark image of B is due to the reflection of secondary gamma radiation from the letter B. And moreover based on your clarification is it confirmed that either dark or light image of letter B appears in every case. Expecting one more response from you





 
 Reply 
 
RT Guy
RT Guy
02:19 Aug-22-2006
Re: light or black image B
----------- Start Original Message -----------
: I thank you for the clarification of my query regarding backscatter radiation.Is the dark image of B is due to the reflection of secondary gamma radiation from the letter B. And moreover based on your clarification is it confirmed that either dark or light image of letter B appears in every case. Expecting one more response from you
:
------------ End Original Message ------------

Correct! A light image of the B means reject. A dark image or no image means accept


 
 Reply 
 
Arun
Arun
07:45 Aug-22-2006
Re: light or black image B
-Hai, This Letter B is placed at the back side of film,
if there is a light image of letter B appears in the film after processing it is the indication for back scatter
Arun
---------- Start Original Message -----------
: I thank you for the clarification of my query regarding backscatter radiation.Is the dark image of B is due to the reflection of secondary gamma radiation from the letter B. And moreover based on your clarification is it confirmed that either dark or light image of letter B appears in every case. Expecting one more response from you
:
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window