where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

ULTRASOUND INSTITUTE
The Ultrasound Institute can develop new advanced ultrasonic measurement, imaging and NDT techniques for non-conventional applications.
1047 views
Technical Discussions
Simon Griffin
Simon Griffin
05:47 Jul-27-1999
Air/gas transmission

'Gases are generally rather attenuating in the MHz range', Does anybody
have any tables or graphs representing this. After extensive searching
I cannot quantify this statement.

Regards

Simon Griffin B.Eng IoM


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 268

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
268
06:37 Jul-27-1999
Re: Air/gas transmission
: 'Gases are generally rather attenuating in the MHz range', Does anybody
: have any tables or graphs representing this. After extensive searching
: I cannot quantify this statement.

: Regards

: Simon Griffin B.Eng IoM

You can find some tables and graphs in Landold Börnstein: Molecular Acoustics or in older books (written about 1930).
It is difficult to find such data in newer books. If you are interested, I can send you the copies of such tables.

But you must know - if you will test sound propagation in air, it will be difficult to make reliable measurements with frequencies higher then about 2 MHz under
normal atmospheric condistions (without higner pressure). We have made some experiments with such frequencies and the results are not easy to compare.

You will need to find a good method for such measurements.

Sincerely


 
 Reply 
 
Robert (Rocky) A. Day
Engineering
Milky Way Jewels, USA, Joined Nov 1998, 40

Robert (Rocky) A. Day

Engineering
Milky Way Jewels,
USA,
Joined Nov 1998
40
00:00 Jul-28-1999
Re: Air/gas transmission
Try to get Eric Ash's book 'Scanned Image Microscopy' and in is an article by Kumar Wickramasinghe and C. Petts on 'Gas Medium Acoustic Microscopy' with data as a function of pressure for several gases. Has some references that may also be useful. Their data goes to 40 MHz and 200 bars.

: 'Gases are generally rather attenuating in the MHz range', Does anybody
: have any tables or graphs representing this. After extensive searching
: I cannot quantify this statement.

: Regards

: Simon Griffin B.Eng IoM




 
 Reply 
 
Leon Vandervalk
R & D
DeFelsko Corporation, USA, Joined Oct 1999, 3

Leon Vandervalk

R & D
DeFelsko Corporation,
USA,
Joined Oct 1999
3
08:11 Sep-02-1999
Re: Air/gas transmission
You may want to contact the folks at VN Instruments.
http://www.vninstruments.com
These guys have built some very impressive air coupled ultrasonic instrumentation. I've seen some of the experimental data generated using their gear and recall seeing attenuation plots...


: : 'Gases are generally rather attenuating in the MHz range', Does anybody
: : have any tables or graphs representing this. After extensive searching
: : I cannot quantify this statement.

: : Regards

: : Simon Griffin B.Eng IoM

: You can find some tables and graphs in Landold Börnstein: Molecular Acoustics or in older books (written about 1930).
: It is difficult to find such data in newer books. If you are interested, I can send you the copies of such tables.

: But you must know - if you will test sound propagation in air, it will be difficult to make reliable measurements with frequencies higher then about 2 MHz under
: normal atmospheric condistions (without higner pressure). We have made some experimentswith such frequencies and the results are not easy to compare.

: You will need to find a good method for such measurements.

: Sincerely




 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window