where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
551 views
Technical Discussions
Rolando Perez Hernandez
Engineering
Empet, Cuba, Joined Jul 2006, 1

Rolando Perez Hernandez

Engineering
Empet,
Cuba,
Joined Jul 2006
1
03:55 Sep-07-2006
Need information about inspection welding criteria

I need to find the criteria for welding inspection with ndt by ultrasonic


 
 Reply 
 
Vikas Dighe
Vikas Dighe
00:09 Sep-23-2006
Re: Need information about inspection welding criteria
Welding inspection with what acceptance criterion? ASME or EN?

----------- Start Original Message -----------
: I need to find the criteria for welding inspection with ndt by ultrasonic
------------ End Original Message ------------




 
 Reply 
 
Eng.Ahmad
NDT Inspector, ASNT NDT Level III (UT, PT & MT) New Vision for Technical Services GM (www.nevcc.com)
New Vision for Technical services , Jordan, Joined Jan 2007, 38

Eng.Ahmad

NDT Inspector, ASNT NDT Level III (UT, PT & MT) New Vision for Technical Services GM (www.nevcc.com)
New Vision for Technical services ,
Jordan,
Joined Jan 2007
38
01:21 Jan-16-2007
Re: Need information about inspection welding criteria
----------- Start Original Message -----------
: Welding inspection with what acceptance criterion? ASME or EN?
: : I need to find the criteria for welding inspection with ndt by ultrasonic
------------ End Original Message ------------

hi friend

did you get any accept rejct critria
if yos plz can i see it


 
 Reply 
 

Product Spotlight

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window