where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1185 views
Technical Discussions
Farshid Alizadeh
NDT Inspector, Eng. sales
Hitan Co Ltd, Iran, Joined Oct 1999, 5

Farshid Alizadeh

NDT Inspector, Eng. sales
Hitan Co Ltd,
Iran,
Joined Oct 1999
5
08:37 Jul-30-1999
urgent required one C-Scan UT System for purchasing.

U R G E N T

: Dear Friends,

: I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

: Thank you very much in advance.

: Regards.

: Farshid




 
 Reply 
 
Norm Woodward
Norm Woodward
02:31 Jul-30-1999
Re: urgent required one C-Scan UT System for purchasing.

: : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?


One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

Each has eddy current and bondtesting capabilities also.

Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

BTW, if anyone is thinking about a portable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

It is available commercially from:
NTIC
US Dept of Commerce
5285 Port Royal Rd
Springfield VA 22161

Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

Norm



 
 Reply 
 
Norm Taormina
Norm Taormina
02:48 Sep-08-1999
Re: urgent required one C-Scan UT System for purchasing.

: : : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

:
: One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

: Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

: Each has eddy current and bondtesting capabilities also.

: Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

: BTW, if anyone is thinking about a portable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

: It is available commercially from:
: NTIC
: US Dept of Commerce
: 5285 Port Royal Rd
: Springfield VA 22161

: Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

: Norm

: AEA Technology has an outstanding "C" scan ultrasonic imaging system that images "C","D", and "E" scans concurrently. E-mail me for info. if your interested.




 
 Reply 
 
Peter Simpson
Peter Simpson
09:41 Sep-08-1999
Re: urgent required one C-Scan UT System for purchasing.
If you want to evaluate ANDSCAN a system could be made available for rental from Ashtead Technology Ltd, tel +44 (0)1224 771888.


Regards


Peter Simpson
www.ashtead-technology.com

:
: : : : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

: :
: : One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

: : Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

: : Each has eddy current and bondtesting capabilities also.

: : Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

: : BTW, if anyone is thinking about aportable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

: : It is available commercially from:
: : NTIC
: : US Dept of Commerce
: : 5285 Port Royal Rd
: : Springfield VA 22161

: : Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

: : Norm

: : AEA Technology has an outstanding "C" scan ultrasonic imaging system that images "C","D", and "E" scans concurrently. E-mail me for info. if your interested.




 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window