where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1184 views
Technical Discussions
Farshid Alizadeh
NDT Inspector, Eng. sales
Hitan Co Ltd, Iran, Joined Oct 1999, 5

Farshid Alizadeh

NDT Inspector, Eng. sales
Hitan Co Ltd,
Iran,
Joined Oct 1999
5
08:37 Jul-30-1999
urgent required one C-Scan UT System for purchasing.

U R G E N T

: Dear Friends,

: I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

: Thank you very much in advance.

: Regards.

: Farshid




 
 Reply 
 
Norm Woodward
Norm Woodward
02:31 Jul-30-1999
Re: urgent required one C-Scan UT System for purchasing.

: : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?


One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

Each has eddy current and bondtesting capabilities also.

Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

BTW, if anyone is thinking about a portable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

It is available commercially from:
NTIC
US Dept of Commerce
5285 Port Royal Rd
Springfield VA 22161

Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

Norm



 
 Reply 
 
Norm Taormina
Norm Taormina
02:48 Sep-08-1999
Re: urgent required one C-Scan UT System for purchasing.

: : : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

:
: One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

: Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

: Each has eddy current and bondtesting capabilities also.

: Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

: BTW, if anyone is thinking about a portable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

: It is available commercially from:
: NTIC
: US Dept of Commerce
: 5285 Port Royal Rd
: Springfield VA 22161

: Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

: Norm

: AEA Technology has an outstanding "C" scan ultrasonic imaging system that images "C","D", and "E" scans concurrently. E-mail me for info. if your interested.




 
 Reply 
 
Peter Simpson
Peter Simpson
09:41 Sep-08-1999
Re: urgent required one C-Scan UT System for purchasing.
If you want to evaluate ANDSCAN a system could be made available for rental from Ashtead Technology Ltd, tel +44 (0)1224 771888.


Regards


Peter Simpson
www.ashtead-technology.com

:
: : : : I am searching UT scanner suitable for c-scan testing of auto parts with common analog UT instrument and imaging software ?

: :
: : One unit I have admired from afar is Krautkramer/Hocking's ANDSCAN unit. It would use your own UT instrument, which I think you want, plus it has quite a bit of flexibility as to contours of the surface.

: : Boeing (formerly McDonnell-Douglas) has a MAUS system which may be considered, but it sort of assumes that you will be using its pulser/receiver, though it could be overridden if you wanted to use your own equipment.

: : Each has eddy current and bondtesting capabilities also.

: : Your local Krautkramer dealer can tell you about ANDSCAN; Ms Nancy Wood would love to talk to you about the MAUS at (314)234-9028.

: : BTW, if anyone is thinking about aportable C-scan unit, but not in a rush, they may be interested in buying or borrowing a report written by Sandia National Labs, back in 1994, called "Evaluation of Scanners for C-Scan Imaging in NDI of Aircraft - SAND94-0945." Though not up-to-date, it does do side-by-side comparisons of several systems still available today. It's sort of a "Consumer's Report" of C-Scan equipment.

: : It is available commercially from:
: : NTIC
: : US Dept of Commerce
: : 5285 Port Royal Rd
: : Springfield VA 22161

: : Unfortunately, I can't find the price for it, but it could be worth whatever the cost, not to have to check every system available.

: : Norm

: : AEA Technology has an outstanding "C" scan ultrasonic imaging system that images "C","D", and "E" scans concurrently. E-mail me for info. if your interested.




 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window