where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
646 views
Technical Discussions
J.H.Lee
J.H.Lee
07:15 Sep-30-2006
TOFD for Coner joint

Can be applied for Coner type joint bt TOFD method?


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1292

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1292
05:55 Sep-30-2006
Re: TOFD for Coner joint
Mr. Lee:
Corner joints are possible to inspect using TOFD under certain conditions. However, the complexities of calculating flaw position are much more comlex than for butt welds.
I think the best option for such algorithms is through a company company called Sonovation
http://www.sonovation.com/home.html

Regards
Ed

----------- Start Original Message -----------
: Can be applied for Coner type joint bt TOFD method?
------------ End Original Message ------------




 
 Reply 
 
Simon Amallraja
Simon Amallraja
09:14 Oct-01-2006
Re: TOFD for Coner joint
----------- Start Original Message -----------
: Can be applied for Coner type joint bt TOFD method?
------------ End Original Message ------------

Dear Mr. Lee,

You can contact Mr. Fredric Laprise of Zetec for this application. He is the Product Specialist, who can help you on this. You can contact him by e mail> His ID Flaprise@zetec.com.

Regards.

D.Simon Amallraja.


 
 Reply 
 

Product Spotlight

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window