where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

795 views
Technical Discussions
Dave Cartwright
Director, Technical/R+D
Cygnus Instruments Ltd., United Kingdom, Joined Oct 1999, 3

Dave Cartwright

Director, Technical/R+D
Cygnus Instruments Ltd.,
United Kingdom,
Joined Oct 1999
3
01:27 Aug-03-1999
High temperature u/s transducer

We urgently need to source transducers (50+) for a permanent thickness monitoring application.

The devices must be capable of operating at 250C whilst bonded to the stainless steel piping of interest. The entirety will be lagged and left un-maintained or inspected for at least 12 months!

Centre frequency would be at least 3.5MHz but not higher than 5MHz, wideband, high resolution - capable of measuring down to 1.75mm or less ideally.

We need off the shelf product - not the predeicted result of research please!

Thanks


 
 Reply 
 
Dipl.-Ing. Martin Heinz
Dipl.-Ing. Martin Heinz
01:34 Aug-03-1999
Re: High temperature u/s transducer
: We urgently need to source transducers (50+) for a permanent thickness monitoring application.

: The devices must be capable of operating at 250C whilst bonded to the stainless steel piping of interest. The entirety will be lagged and left un-maintained or inspected for at least 12 months!

: Centre frequency would be at least 3.5MHz but not higher than 5MHz, wideband, high resolution - capable of measuring down to 1.75mm or less ideally.

: We need off the shelf product - not the predeicted result of research please!

: Thanks

Dear Mr. Cartwright,

please contact the companies ETALON (http://www.etaloninc.com) and ULTRAN (http://www.ultranlabs.com). Both companies manufacture high-temperature NDT-probes for testing at continuous temperatures of more than 300° C.

Best regards,

Dipl.-Ing. Martin Heinz.



 
 Reply 
 
Norm Taormina
Norm Taormina
02:37 Sep-08-1999
Re: High temperature u/s transducer
: : We urgently need to source transducers (50+) for a permanent thickness monitoring application.

: : The devices must be capable of operating at 250C whilst bonded to the stainless steel piping of interest. The entirety will be lagged and left un-maintained or inspected for at least 12 months!

: : Centre frequency would be at least 3.5MHz but not higher than 5MHz, wideband, high resolution - capable of measuring down to 1.75mm or less ideally.

: : We need off the shelf product - not the predeicted result of research please!

: : Thanks

: Dear Mr. Cartwright,

: please contact the companies ETALON (http://www.etaloninc.com) and ULTRAN (http://www.ultranlabs.com). Both companies manufacture high-temperature NDT-probes for testing at continuous temperatures of more than 300° C.

: Best regards,

: Dipl.-Ing. Martin Heinz.




 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window