where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Vallen-Systeme GmbH
The Acoustic Emission Company! Since 1987 Vallen stands for competence and continuity in AE and for reliable business cooperation and support.

Forum > Articles & News > Post A Message
You are writing a reply to the message of MD RAKIB UDDIN dated at 14:09 Jun-13-2015

Thank you for posting a feedback to:
"Echo Graphic introduces the EG430NDT, a X-ray film processor designed for Non-Destructive Testing (NDT)"
Your feedback will be added to the article and also posted to the forum. Authors with email address will receive your feedback as well.


Upload Files (optional for attachments)

Your Name
Your Email*

Member's Profile Author's Profile Exhibitor
*MyNDT Members shall use their profile email addresss to ensure a link to their profile! We invite Non Members to register before submitting a message here
Subject: Re: Echo Graphic introduces the EG430NDT, a X-ray film processor designed for Non-Destructive Testing (NDT)
Message: Post Matter is Limited to NDT ! Posting Rules. Please ready our Privacy Policy
Notify replies to me:

Security Question:
=


2826 views
Articles & News
MD RAKIB UDDIN
MD RAKIB UDDIN
14:09 Jun-13-2015
Echo Graphic introduces the EG430NDT, a X-ray film processor designed for Non-Destructive Testing (NDT)

Dear sir,
I am Rakib uddin from walton Hi Tech Industries Ltd .We are going to establish compressor project where we will cast compressor parts such as crank shaft,crank case ,bearing.So is this machine capable to detect casting defect?

 
 
Dr. Uwe Zscherpel
Director,
BAM Berlin, Germany, Joined Jan 2010, 89

Dr. Uwe Zscherpel

Director,
BAM Berlin,
Germany,
Joined Jan 2010
89
11:45 Jun-14-2015
Re: Echo Graphic introduces the EG430NDT, a X-ray film processor designed for Non-Destructive Testing (NDT)
In Reply to MD RAKIB UDDIN at 14:09 Jun-13-2015 (Opening).

Dear RAKIB UDDIN,
to detect casting defects you will need beside a film processor also industrial NDT films and a suitable chemistry for film development and also an X-ray tube for film exposure! If they all fulfill the requirements of ISO 11699 in their combination, only than you are able to detect casting indications using the film system class as specified in ISO 11699-1 and the quality assurance as described in ISO 11699-2.
A processor alone does not do the job!
Greetings
Uwe Z.

 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window