where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
836 views
Technical Discussions
Roderic K Stanley
Roderic K Stanley
01:22 Aug-16-1999
COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N

We make carbon steel coiled tubing. Someone has sated he can coat it internally with a plastic layer 0.020 in thick. Does anyone have a device that can run 10,000 ft through coiled tubing on a spool and determine the coating thickness. It ought to be possible with eddy current stand-off sensors mounted in a 'pig" , with a lot of electronics to store the data.

Roderic K Stanley

Sr Research Scientist.


    
 
 Reply 
 
Leon Vandervalk
R & D
DeFelsko Corporation, USA, Joined Oct 1999, 3

Leon Vandervalk

R & D
DeFelsko Corporation,
USA,
Joined Oct 1999
3
00:16 Aug-20-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N
We make handheld battery operated coating thickness gages that could easly be mounted on a pig. On board memory could easily support 10,000+ readings.


    
 
 Reply 
 
Leon Vandervalk
R & D
DeFelsko Corporation, USA, Joined Oct 1999, 3

Leon Vandervalk

R & D
DeFelsko Corporation,
USA,
Joined Oct 1999
3
00:23 Aug-20-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N
We make handheld battery operated coating thickness gages that could easily be mounted on a pig. On board memory could easily support 10,000+ readings.


    
 
 Reply 
 
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
07:53 Sep-07-1999
Re: COATING THICKNESS MEASUREMENT INSIDE COILED TUBING.N
Dear Mr. Roderic K Stanley,

QUEST Integrated, Inc. manafactures several types of Tube ID Inspection systems. One remote pigging system inparticular utilizes both ultasonics and laser. I think it is much too large for your tubing. Can you provide more detailed specifications on the tubing (ie Diameter, Thickness, Material, etc.)?

Regards,
Richard D. Roberts
QUEST Integrated, Inc.



    
 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window