where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
527 views
Technical Discussions
Dao Duy Tuan
Sales,
ATT, Vietnam, Joined Dec 2006, 1

Dao Duy Tuan

Sales,
ATT,
Vietnam,
Joined Dec 2006
1
01:22 Dec-22-2006
Digital radiography

Hi all,

I am Dao Duy Tuan from VietnamAirlines corp Vietnam. We are so much interested in Digital Radiography system and we want to by a system to test composite on Air Bus airplanes but we do not know any standard that we can apply. Anybody can help me the followings:
- What standard accept digital x-ray?
- Does Air Bus approve digital x-ray?
- Which manufacture have best digital x-ray system?
Looking forward to hearing from you soon.

Best regards,
Dao Duy Tuan
VietnamAirlines Corporation.


 
 Reply 
 
Kari Latvala
Kari Latvala
00:46 Jan-10-2007
Re: Digital radiography
Hello,
There is no digital radiography standards in EN, but ASME V included quides for radioscopy and some cases those are applicable for digital radiography also. We have had some co- operations with Vidisco LTD bilded the detector systems with pulsed x- ray source. They have some cases with aircrafts and composite materials.
They have www pages including contact information.
www.vidisco.com

Hope help you works

kari


 
 Reply 
 

Product Spotlight

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window