where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

518 views
Technical Discussions
jairo sanchez
jairo sanchez
05:37 Sep-20-1999
ardrox et equipment

we have an eddy current equipment from ARDROX company. rigth now the equiment is not working properly and we need the probe for non/ferritic alloys.

the company AEROTURBO is from Colombia, we work in the aeronautical field.

if any body nows the adress or the representative of this company ARDROX, for south america or in the USA?


    
 
 
Jamie Gauthier
Jamie Gauthier
06:26 May-26-2000
Re: ardrox et equipment
You can have any Ardrox equipment serviced by Gould-Bass in the USA. The web page is www.gould-bass.com.
Their Phone number is 909-623-6793.

We have our equipment calibrated there.


    
 
 
Agus Sunandar
Agus Sunandar
00:34 Jul-18-2000
Re: ardrox et equipment
: You can have any Ardrox equipment serviced by Gould-Bass in the USA. The web page is www.gould-bass.com.
: Their Phone number is 909-623-6793.

: We have our equipment calibrated there.




    
 
 

Product Spotlight

Webinar: FMC & Advanced Focusing Techniques for Improved Ultrasonic Inspections

Phased array ultrasound is now a commonly accepted inspection technology. Now there is excitement ar
...
ound new techniques in Phased Array: Full Matrix Capture (FMC) & Total Focusing Method (TFM). Our webinar on December 5 & 6 will illustrate how these techniques, implemented on a TOPAZ64 instrument, can improve the results of existing inspections. Register today.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

With a 64-channel parallel architecture, GEKKO is a flaw detector offering at the same time conven
...
tional UT, standard PAUT, TOFD and real-time Total Focusing Method (TFM). GEKKO improves the detection, with better defects characterization and sizing as well as for misoriented defects. Some procedures require standard UT, others TOFD or PA. GEKKO includes all these techniques to offer a versatile and field-ready equipment. - 64:64 parallel channels - + 4 additional TOFD - Conventional UT channels - International code compliance: ASME, AWS, API, ASTM, ISO-EN Watch the video: https://youtu.be/kuEY_RwWS3Q
>

NozzleScan: Radial nozzle scanner with probe skew

NozzleScan is a versatile manual scanning solution developed for the inspection of nozzle welds in
...
both set-through and set-on configurations. Available in both two-axis and three-axis instrument configurations and adaptable to cover a wide range of 90-degree nozzle sizes, from 3" upwards, on ferritic and austenitic materials.The transducer skew axis can also be adjusted, encoded and locked.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s