where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Matec Instrument Companies, Inc.
Ultrasonic test instrumentation and systems for quality control inspection and production testing applications and scientific research.
854 views
Technical Discussions
Azhar
Azhar
09:30 Mar-07-2007
PT performance check

I am instructor in NDT training centre
may i know how a plant performance check of penetrant inspection can be carried out?


 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 306

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
306
04:01 Mar-07-2007
Re: PT performance check
----------- Start Original Message -----------
: I am instructor in NDT training centre
: may i know how a plant performance check of penetrant inspection can be carried out?
------------ End Original Message ------------

Hi,
Performance checks of Penetrant Systems are usually an Aerospace requirement.
There are written procedures within the Aerospace companies documentations that specifies how these tests should be performed and how often.

NDT CDonsultants Ltd. in the UK is a world-wide provider of NDT Specialist services, especially to the Aerospace industry, and if this is for aerospace apoplications, I suspect that there will also be other issues which will need addressing.

The correct component to address this performance check is a "TAM" panel, and we market these at GB£282.00 plus shipping should you require one, otherwise we will be pleased to offer our aerospace authorised and approved NDT Level III services.

Regards,

Godfrey Hands



 
 Reply 
 
Fred Raco, Jr.
Consultant,
RNDT, Inc., USA, Joined Jul 2002, 24

Fred Raco, Jr.

Consultant,
RNDT, Inc.,
USA,
Joined Jul 2002
24
06:59 Mar-07-2007
Re: PT performance check
General items that need to be checked can be found in ASTM E 1417.


----------- Start Original Message -----------
: : I am instructor in NDT training centre
: : may i know how a plant performance check of penetrant inspection can be carried out?
: Hi,
: Performance checks of Penetrant Systems are usually an Aerospace requirement.
: There are written procedures within the Aerospace companies documentations that specifies how these tests should be performed and how often.
: NDT CDonsultants Ltd. in the UK is a world-wide provider of NDT Specialist services, especially to the Aerospace industry, and if this is for aerospace apoplications, I suspect that there will also be other issues which will need addressing.
: The correct component to address this performance check is a "TAM" panel, and we market these at GB£282.00 plus shipping should you require one, otherwise we will be pleased to offer our aerospace authorised and approved NDT Level III services.
: Regards,
: GodfreyHands
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

On-Demand Webinar: Advanced Ultrasonic Techniques for HTHA Detection & Assessment

In the Oil and Gas industry, High Temperature Hydrogen Attack (HTHA) can occur in steels operating a
...
t high temperature, usually above 205°C (400°F). Early stages of HTHA are very difficult to detect. Join us for a webinar presented by Guy Maes, Zetec Sales Engineer Director. The webinar will demonstrate how advanced ultrasonic techniques are deployed for efficient and reliable HTHA inspections.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window