where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1023 views
Technical Discussions
Lorenzo Digregorio
Consultant, AUT specialist
IMG Ultrasuoni Srl, Italy, Joined Apr 2007, 691

Lorenzo Digregorio

Consultant, AUT specialist
IMG Ultrasuoni Srl,
Italy,
Joined Apr 2007
691
00:44 Apr-04-2007
Code Case 2235 compliance

Somebody has developed a "videorecording" system able to record the GE PHASOR screeen in correlation with an encoder mounted on the PA probe. In other words, the encoder is used as a "trigger" for recording the screen display. They claim it is "CODE CASE 2235 COMPLIANT". What is the forum opinion?


 
 Reply 
 
Massimo Carminati , E-mail:
Massimo Carminati , E-mail:
06:24 Apr-16-2007
Re: Code Case 2235 compliance
I don't believe that when the ASME committee stated that "the ultrasonic examination shall be performed using a device employing automatic computer based data acquisition" included a "movie" of the instrument screen! In my opinion "data" are "digitized UT signals in unprocessed form" and not a VGA output!



 
 Reply 
 
RT. Jeyakumar , E-mail:
RT. Jeyakumar , E-mail:
04:45 Apr-19-2007
Re: Code Case 2235 compliance
Good day,

I dont think Phasor can give recorded Video presentation. It would be like this., recorded image of TOFD can be post processed for Interpretation in offline (after the test).

So, you can run the image of TOFD (D-Scan) along with A-scan. So it gives real time offline presentation.

With Warm Regards,

RT. Jeyakumar

----------- Start Original Message -----------
: Somebody has developed a "videorecording" system able to record the GE PHASOR screeen in correlation with an encoder mounted on the PA probe. In other words, the encoder is used as a "trigger" for recording the screen display. They claim it is "CODE CASE 2235 COMPLIANT". What is the forum opinion?
------------ End Original Message ------------




 
 Reply 
 
Massimo Carminati , E-mail:
Massimo Carminati , E-mail:
07:35 Apr-20-2007
Re: Code Case 2235 compliance
Does it really allow to perform TOFD inspection?


 
 Reply 
 
RT. Jeyakumar , E-mail:
RT. Jeyakumar , E-mail:
08:24 Apr-20-2007
Re: Code Case 2235 compliance
Good day,

I dont know. But you can check equipment's technical specification with BS 7706.

With Warm regards,

RT. Jeyakumar


-----
------ Start Original Message -----------
: Does it really allow to perform TOFD inspection?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window