where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

680 views
Technical Discussions
Nguyen Thanh Chung
Nguyen Thanh Chung
03:25 May-25-2007
NDT for automotive parts

Dear Alls,

We are a company specialized in manufaturing of connecting rods for motorbike engines with products capacity is 5000 products per day. 100% of our products need to be NDT check for surface flaws with inspection rate upto 600 products per hour. Please advice us what method and equipment can handle this task.

Thanks you,



    
 
 
Nigel
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
07:00 May-26-2007
Re: NDT for automotive parts

Magnetic Analysis Corporation have many different system for rapid screening of machined parts for surface defects.

www.mac-ndt.com

Regards

----------- Start Original Message -----------
: Dear Alls,

: We are a company specialized in manufaturing of connecting rods for motorbike engines with products capacity is 5000 products per day. 100% of our products need to be NDT check for surface flaws with inspection rate upto 600 products per hour. Please advice us what method and equipment can handle this task.
: Thanks you,
------------ End Original Message ------------




    
 
 
Amiri
Consultant, NDT/QC/WELD INSPECTION
Iran, Joined Nov 2005, 20

Amiri

Consultant, NDT/QC/WELD INSPECTION
Iran,
Joined Nov 2005
20
01:36 May-26-2007
Re: NDT for automotive parts
Dear Friend,
Refering to your inquiry,for automative long parts,MT by bench unit is prefered.you should select type of techniques(magnetic field type)in accordance with important defects orientation and direction.multi directional system with wet bath fluorescent is prefered.

----------- Start Original Message -----------
: Dear Alls,
: We are a company specialized in manufaturing of connecting rods for motorbike engines with products capacity is 5000 products per day. 100% of our products need to be NDT check for surface flaws with inspection rate upto 600 products per hour. Please advice us what method and equipment can handle this task.
: Thanks you,
------------ End Original Message ------------




    
 
 

Product Spotlight

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

X-ray CT aids research into defect formation in AM parts

X-ray CT is used to research how additive manufacturing process parameters influence defect format
...
ion in AM parts.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window