where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1822 views
Technical Discussions
Prasad
Director, NDT Consultant
Energy Workforce Group of Companies, Malaysia, Joined Aug 2003, 12

Prasad

Director, NDT Consultant
Energy Workforce Group of Companies,
Malaysia,
Joined Aug 2003
12
02:32 Jun-01-2007
Rail Inspection

Gentlemen,

Could anyone advise me the NDT standards (EN or American) used in Rail industry?

If they are availble, where can I get them?

Thanks,



 
 Reply 
 
s chris
s chris
07:37 Jun-01-2007
Re: Rail Inspection
----------- Start Original Message -----------
: Gentlemen,
: Could anyone advise me the NDT standards (EN or American) used in Rail industry?
: If they are availble, where can I get them?
: Thanks,
------------ End Original Message ------------

OSHA Standard CFR, 1926.1052 (c)


 
 Reply 
 
Ed Roane
Ed Roane
08:19 Jun-02-2007
Re: Rail Inspection
----------- Start Original Message -----------
: : Gentlemen,
: : Could anyone advise me the NDT standards (EN or American) used in Rail industry?
: : If they are availble, where can I get them?
: : Thanks,
: OSHA Standard CFR, 1926.1052 (c)
------------ End Original Message ------------

Prasad
I dont know if this is what you are looking for but try.
www.webstore.ansi.org
Item # APTA-RT-S-FS-002-02
Title: Standard for Rail Transit Track Inspection and Maintenance.



 
 Reply 
 
prasad
Director, NDT Consultant
Energy Workforce Group of Companies, Malaysia, Joined Aug 2003, 12

prasad

Director, NDT Consultant
Energy Workforce Group of Companies,
Malaysia,
Joined Aug 2003
12
03:59 Jun-07-2007
Re: Rail Inspection
Gentlemen,

Many thanks for the help from the forum

Kind Regards,

----------- Start Original Message -----------
: Gentlemen,
: Could anyone advise me the NDT standards (EN or American) used in Rail industry?
: If they are availble, where can I get them?
: Thanks,
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window