where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

804 views
Technical Discussions
AMIRI
Consultant, NDT/QC/WELD INSPECTION
Iran, Joined Nov 2005, 20

AMIRI

Consultant, NDT/QC/WELD INSPECTION
Iran,
Joined Nov 2005
20
06:20 Jul-02-2007
Temperature Effect on UT

Dear Friends,
What is effects of high temperature on sound velocity in matrials .for example in thickness measuring of c.steels on 500 oC what is the changing of actual thickness which detected by UT?
Regards


    
 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
06:41 Jul-02-2007
Re: Temperature Effect on UT
Sound velocity in all engineering materials decreases with temperature. In common steel alloys, the velocity decreases approximately 1% per 55 degrees Celcius. Thus, if you do not compensate for this change, your thickness readings at elevated temperature will be too high.

We have an application note on the subject of high temperature testing that you may find useful. Please see the link below.



    
 
 
chris s
Consultant, qc manager
USA, Joined Apr 2007, 9

chris s

Consultant, qc manager
USA,
Joined Apr 2007
9
08:10 Jul-02-2007
Re: Temperature Effect on UT
----------- Start Original Message -----------
: Dear Friends,
: What is effects of high temperature on sound velocity in matrials .for example in thickness measuring of c.steels on 500 oC what is the changing of actual thickness which detected by UT?
: Regards
------------ End Original Message ------------

you can elevate the temperature of your calibration block to 500oC and UT thickness readings will be accurate



    
 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built in \r\nbattery and internal wireless c
...
ommunication, the NEOS III is perfect \r\nfor users that want to quickly assess an item.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window