Joe Buckley Consultant, ASNT L-III, Honorary Secretary of BINDT Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 517
Joe Buckley Consultant, ASNT L-III, Honorary Secretary of BINDT Level X NDT, BINDT, United Kingdom, Joined Oct 1999 517
01:11 Jul-06-2007 Re: calculate the emergency point value of the angle beam probe The emergency point value- That sounds serious....
The emission point of an angle beam probe cannot be easily calculated, normally it is measured using a suitable test block (for example a V1/K1 block )
---------- Start Original Message ----------- : Dear friends, : : Does any friends know how to calculn angle beam te the emergency point value of the angle beam probe?(e.g. the angle is 32¡ã£¬and some other needed values is provide) : Best regards! ------------ End Original Message ------------
The conformability is obtained with a flexible membrane filled with water between the transducer and
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections