where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GB Inspection Systems Ltd.
A leading UK manufacturer of Ultrasonic Probes, Accessories, Supplier of NDT Equipment and more.

489 views
Technical Discussions
Dick Gray
Engineering,
Canada, Joined Nov 1999, 14

Dick Gray

Engineering,
Canada,
Joined Nov 1999
14
03:31 Nov-24-1999
MPI equipment, yokes and u.v. lights

Does anyone know of a yoke that has,

1)A case certified as a NEMA Type 4 enclosure
2)Meets ASME Section V for lifting capacity
3)Is electrically certified for use in Canada

I'm also looking for a U.V. light that has

1)A case certified as a NEMA Type 4 enclosure
2)Meets ASME V for output
3)Is electrically certified for use in Canada.

Thanks,

Dick Gray
Ontario Power Generation
H14-B11, 700 University Avenue
Toronto,
Ontario, Canada, M5G 1X6.
Tel: (416) 592-6631




    
 
 Reply 
 
Schnitger, Christoph
Schnitger, Christoph
01:34 Nov-27-1999
Re: MPI equipment, yokes and u.v. lights

Hello Joe,

please are so kind to take a look at my ONLINE SHOP
for NDT !
It might be possible that i have the correct equipment
which are you are looking for !

Regards
Christoph



    
 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window