where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GRANPECT COMPANY Ltd
GRANPECT, X-ray NDT Expert You Can Rely on

541 views
Technical Discussions
Bruce Maxfield
Engineering, electronics and instrumentation
Analogic Engineering, Inc., USA, Joined Jan 2000, 10

Bruce Maxfield

Engineering, electronics and instrumentation
Analogic Engineering, Inc.,
USA,
Joined Jan 2000
10
01:25 Jan-04-2000
PC card digitizer

I am looking for a PC card (PCMCIA) digitizer card that has a time resolution of at least 50 nsec.


    
 
 
Chuck Garner
Chuck Garner
01:16 Jan-28-2000
Re: PC card digitizer
: I am looking for a PC card (PCMCIA) digitizer card that has a time resolution of at least 50 nsec.

I've been looking for a good PCMCIA digitizer card for a while. About the only thing I've found is a new National Instruments NI 5102 digital oscilloscope card. It is an 8 bit digitizer, 20 MS/s maximum digitizing rate, 15 MHz analog bandwidth. I haven't had the card long enough to do a thorough evaluation. The VirtualBench-Scope software that comes with it is somewhat limited in functionality.


    
 
 
F. J. Dodd
F. J. Dodd
00:59 Mar-27-2000
Re: PC card digitizer
: : I am looking for a PC card (PCMCIA) digitizer card that has a time resolution of at least 50 nsec.

: I've been looking for a good PCMCIA digitizer card for a while. About the only thing I've found is a new National Instruments NI 5102 digital oscilloscope card. It is an 8 bit digitizer, 20 MS/s maximum digitizing rate, 15 MHz analog bandwidth. I haven't had the card long enough to do a thorough evaluation. The VirtualBench-Scope software that comes with it is somewhat limited in functionality.

Automated Inspection Systems, Inc. makes a 9 bit A/D PC (formerly PCMCIA) card used for note book computer based
UT systems. Maximum sampling rate is 40 Msamples/sec.



    
 
 

Product Spotlight

Spot weld inspection with Phased Array – PHAsis.one

The first PAUT spot weld inspection device offering a physical resolution of the spot weld diamete
...
r better than 0.35mm. Precise: more than 700 real UT measurements per spot weld. Easy to go: minimal training required due to the user friendly inspection software. Be sure: safe evaluation due to the imaging result display and automated creation of an evaluation proposal for the spot weld quality.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s