where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

843 views
Technical Discussions
amir
amir
05:04 Jan-17-2008
about dispersion curve tracing

Hi anybody,
I nedd some information to tracing dispersion curves.
If anybody know about tihs method please aware me.
Best Regards
Amir


 
 Reply 
 
Michael Moles †2014 *1948
, Joined ,
08:01 Jan-17-2008
Re: about dispersion curve tracing
----------- Start Original Message -----------
: Hi anybody,
: I nedd some information to tracing dispersion curves.
: If anybody know about tihs method please aware me.
: Best Regards
: Amir
------------ End Original Message ------------
Contact Ed Ginzel at eginzel@mri.on.ca.
Michael




 
 Reply 
 
Thomas Vogt
R & D, - -
Guided Ultrasonics Ltd, United Kingdom, Joined Apr 2007, 22

Thomas Vogt

R & D, - -
Guided Ultrasonics Ltd,
United Kingdom,
Joined Apr 2007
22
08:07 Jan-17-2008
Re: about dispersion curve tracing
Hi Amir,

I assume you are after dispersion curves for ultrasonic guided waves.

Are you after commercially available software? In which case try this link for a programme called "Disperse":
http://www.imperial.ac.uk/ndt/public/productservice/disperse.htm
You can download a demo version and have a look.

If you are planning to write your own code for tracing dispersion curves or want to use FE modelling, it would be good to know what structure you want the dispersion curves of in order to point you in the right direction - there is a large number of papers on this subject.

Regards,
Tom

----------- Start Original Message -----------
: Hi anybody,
: I nedd some information to tracing dispersion curves.
: If anybody know about tihs method please aware me.
: Best Regards
: Amir
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window