where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Vallen-Systeme GmbH
The Acoustic Emission Company! Since 1987 Vallen stands for competence and continuity in AE and for reliable business cooperation and support.
745 views
Technical Discussions
JMD Corporation
JMD Corporation
00:20 Jan-20-2008
Portable Hardness Tester for Pipes Less than 20mm

Dear Sir,

One of our customers is looking for an equipment or product which can verify the heat treatment process after welding the pipes. It has been understood that hardness checking is one of the way to verify the heat treatment process, can anybody suggest the us a suitable hardness tester?




 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
02:45 Jan-26-2008
Re: Portable Hardness Tester for Pipes Less than 20mm
Mechanical hardness testers such as Equotip (It is a Swiss make) are available but whether the readings will be accurate needs to be verified especially since the diameter is small.

Eddy Current Testing could be another option to verfiy the heat treatment. Pl. give more details about the material, type of heat treatment etc. so that better responses are obtained,

Regards.

Swamy


----------- Start Original Message -----------
: Dear Sir,
: One of our customers is looking for an equipment or product which can verify the heat treatment process after welding the pipes. It has been understood that hardness checking is one of the way to verify the heat treatment process, can anybody suggest the us a suitable hardness tester?
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window