where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

827 views
Technical Discussions
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 604

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
604
03:46 Mar-16-1998
New Article: Customised Design of Transducers for Non-destructive Testing

We are pleased to provide this new incoming article which was specially written
for this month's forum topic.

Rémi Berriet*, Steve Mahaut**; *IMASONIC, **CEA/CEREM.
Customised Design of Transducers for Non-destructive Testing

The current performance requirements of non-destructive testing vary greatly.
Even though standard transducers obtain satisfactory results for certain
applications, the evolution of the industry manager justifies more and more
seeking out transducers designed to order. The issue is notably, to define at
the earliest, and most accurately, the specific character of a set of objectives
and constraints. The example presented by this article relates to the
design of an array transducer.
[5 Figures, 3 References]
URL: http://www.ndt.net/article/0398/berriet/berriet.htm
You w'll find access also through this month's front page.



    
 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window