where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

361 views
Technical Discussions
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 604

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
604
02:19 Feb-18-2000
New Article: Developing NDE Technologies for Infrastructure Assessment

We have added a new article related to this month NDTnet issue.

http://www.tfhrc.gov/pubrds/jan00/nde.htm
Developing NDE Technologies for Infrastructure Assessment
by Glenn A. Washer

This article provides an overview of the Federal Highway
Administration's (FHWA's) program for developing nondestructive
evaluation (NDE) technologies for the inspection and evaluation of
highway infrastructure. This program is designed to address several
key goals in FHWA's National Strategic Plan.



    
 
 

Product Spotlight

Alpha Pro Digital Radiography System

The Alpha Pro digital X-ray system is the ideal system for your NDT \r\nneeds, as it offers amazin
...
g 16 bit images which enable the highest \r\nlevel of detection and identification of hairline cracks. While weighing only 3kg (6.6lbs), this panel has the largest imaging area: 35 X 43 cm (14X17 in).
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window