where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.
488 views
Technical Discussions
allen whittick
allen whittick
06:04 Feb-07-2001
Re: reflection of the (ultra)sound waves
><: I'm looking for the information about reflections of (ultra)sound waves from soft (e.g. human body or soft polymers), respectively hard (e.g. wood) materials. In particular:
: 1. Differences in the changes of the wave attenuation and/or velocity upon reflection from hard material compared to the reflection from the soft material.
: 2. Is there a material dependent wavelength intervall where these differences are particularly large?
: 3. Where to find theoretical description of these changes?
: 4. Where to find material constants enabling to evaluate these changes?
: Will appreciate your response
: Best regards
: Anatol Krozer




 
 Reply 
 
Anatol Krozer
R & D, project manager
Imego Institute, Sweden, Joined Oct 1999, 2

Anatol Krozer

R & D, project manager
Imego Institute,
Sweden,
Joined Oct 1999
2
08:02 Feb-23-2000
reflection of the (ultra)sound waves

I'm looking for the information about reflections of (ultra)sound waves from soft (e.g. human body or soft polymers), respectively hard (e.g. wood) materials. In particular:
1. Differences in the changes of the wave attenuation and/or velocity upon reflection from hard material compared to the reflection from the soft material.
2. Is there a material dependent wavelength intervall where these differences are particularly large?
3. Where to find theoretical description of these changes?
4. Where to find material constants enabling to evaluate these changes?
Will appreciate your response
Best regards
Anatol Krozer


 
 Reply 
 
katie
katie
06:50 Aug-13-2001
Re: reflection of the (ultra)sound waves
: I'm looking for the information about reflections of (ultra)sound waves from soft (e.g. human body or soft polymers), respectively hard (e.g. wood) materials. In particular:
: 1. Differences in the changes of the wave attenuation and/or velocity upon reflection from hard material compared to the reflection from the soft material.
: 2. Is there a material dependent wavelength intervall where these differences are particularly large?
: 3. Where to find theoretical description of these changes?
: 4. Where to find material constants enabling to evaluate these changes?
: Will appreciate your response
: Best regards
: Anatol Krozer
hellbohmn,mn,mn



 
 Reply 
 

Product Spotlight

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

MIZ®-21C: Truly Affordable Eddy Current Handheld with Surface Array Capability

Introducing MIZ-21C, the first truly affordable handheld eddy current instrument with surface array
...
capabilities. MIZ-21C can deliver fast, accurate inspections in demanding NDT applications including aerospace, oil and gas, manufacturing, and power generation. The surface array solution can reduce inspection time by up to 95% compared to traditional handheld pencil probes. The ergonomic design, long battery life, and intuitive touchscreen mean you can inspect more areas faster than ever without fatigue.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window