where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

EKOSCAN
EKOSCAN is a French manufacturer specialized in equipment for ultrasonic Non Destructive Testing: Probes,UT boards & Scanners tailored for your needs

311 views
Technical Discussions
Norman Thomsen
Norman Thomsen
08:26 Feb-24-2000
"Temperature & Rayleigh Waves" by tlh 22 FEB 2000

In addition to the references by Edouard G. Nesvijski on 23 FEB you might find some useful data in the following article:
F. Richter: Die physikalischen Eigenschaten von metallischen Werkstoffen, Metall, Heft 6, 1991, Seite 582.
This article covers temperature dependence of physical properties of 17 different metallic alloys.
Best regards, Norman Thomsen



    
 
 
Adriano Marchioreto
Adriano Marchioreto
00:21 May-08-2000
Re: "Temperature & Rayleigh Waves" by tlh 22 FEB 2000
: In addition to the references by Edouard G. Nesvijski on 23 FEB you might find some useful data in the following article:
: F. Richter: Die physikalischen Eigenschaten von metallischen Werkstoffen, Metall, Heft 6, 1991, Seite 582.
: This article covers temperature dependence of physical properties of 17 different metallic alloys.
: Best regards, Norman Thomsen




    
 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window