where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1797 views
Technical Discussions
Gowri santhosh Palika
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 52

Gowri santhosh Palika

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
52
03:01 May-17-2008
Stereo-radiography

Hi
what is stereo radiography? Pls explain me.


 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
03:06 May-19-2008
Re: Stereo-radiography
Stereo radiography:
The production of two radiographs made using a source shift exactluy parallel to the film plane.

This is taken directly for the A-Z section of this site.

----------- Start Original Message -----------
: Hi
: what is stereo radiography? Pls explain me.
------------ End Original Message ------------




 
 Reply 
 
Gowri
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 52

Gowri

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
52
00:23 May-19-2008
Re: Stereo-radiography
----------- Start Original Message -----------
: Stereo radiography:
: The production of two radiographs made using a source shift exactluy parallel to the film plane.
: This is taken directly for the A-Z section of this site.
: : Hi
: : what is stereo radiography? Pls explain me.
------------ End Original Message ------------

What are the applications of stereo radiography.


 
 Reply 
 
Michel Couture
NDT Inspector,
consultant, Canada, Joined Sep 2006, 891

Michel Couture

NDT Inspector,
consultant,
Canada,
Joined Sep 2006
891
02:19 May-19-2008
Re: Stereo-radiography
Stereo radiography will anable by trigonometric calculation to locate a defect in a part.

Michel

----------- Start Original Message -----------
: : Stereo radiography:
: : The production of two radiographs made using a source shift exactluy parallel to the film plane.
: : This is taken directly for the A-Z section of this site.
: : : Hi
: : : what is stereo radiography? Pls explain me.
: What are the applications of stereo radiography.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window