where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
690 views
Technical Discussions
Harshad Bachal
Harshad Bachal
01:43 Jun-18-2008
Comparison between various steel grades

I want a detailed comparison between MS( Low Carbon) steel & S 355 J2G3 grade steel.

Request for chemical composition & properites for both the grades of steel


 
 Reply 
 
Ryan Burns
Ryan Burns
06:43 Jun-20-2008
Re: Comparison between various steel grades
As I am bored this evening, here you go. If you require further detail, I would suggest contacting a local materials engineering firm to author a report for you.

Ryan.


http://www.corusgroup.com/file_source/StaticFiles/Business%20Units/Engineering%20steels/S355J2G3%20IM.pdf

http://ww.efunda.com/materials/alloys/carbon_steels/show_carbon.cfm?ID=AISI_1018&prop=all&Page_Title=AISI%201018


----------- Start Original Message -----------
: I want a detailed comparison between MS( Low Carbon) steel & S 355 J2G3 grade steel.
: Request for chemical composition & properites for both the grades of steel
------------ End Original Message ------------




 
 Reply 
 
Ed T.
Ed T.
09:42 Jul-01-2008
Re: Comparison between various steel grades
----------- Start Original Message -----------
: I want a detailed comparison between MS( Low Carbon) steel & S 355 J2G3 grade steel.
: Request for chemical composition & properites for both the grades of steel
------------ End Original Message ------------

Or you could look in ASME Section IX or II for the ASTM Specs on those materials.


 
 Reply 
 
sanjay
sanjay
02:33 Sep-05-2008
Re: Comparison between various steel grades
I want steel between various steel grades and there properties and uses


 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window