where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

332 views
Technical Discussions
Jan Kohler
Jan Kohler
03:29 Apr-04-2000
Zerstörungsfreie Messung der Wandstärke von Stahlrohren

In einem Gebäude wurde ein Kaltwassernetz vorinstalliert. Dieses Kaltwassernetz war ca. 10-15 Jahre nicht in Betrieb. Nun soll dieses Rohrnetz (Stahlrohr; Durchmesser DN 15-65)in Betrieb genommen werden. Der Zustand der Rohrleitungen soll mit einem geeigneten Meßverfahren an ca. 10-15 repräsentativen Stellen überprüft werden. Welchen zerstörungsfreie Meßverfahren kommt dafür in Frage? Welche Firma kennt sich mit diesem Verfahren aus und kann kurzfristig Untersuchungen durchführen? Rückinformationen bitte an Herrn Kohler
Tel. 0049-(0)30-2554-2233, Fax. 0049-(0)30-2554-2239 oder e-mail


    
 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window