where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

862 views
Technical Discussions
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
00:57 Apr-27-2000
Advanced NDT Services Europe

We have been commisioned to keep a database for Owner Users to source Advanced NDT Services. We are particularly interested to hear from people who provide servcices such as AE, TOFD, Digital Radiography, Guided Wave UT Etc. in Eastern Europe or areas of the Former Soviet Union (Kazakstan, Azerbaijan etc). If you contact us we would be most interested to hear from you.


 
 Reply 
 
Chris Broekmeulen
Consultant
Rosen Inspection Technologies, Netherlands, Joined Feb 2000, 3

Chris Broekmeulen

Consultant
Rosen Inspection Technologies,
Netherlands,
Joined Feb 2000
3
02:51 Apr-27-2000
Re: Advanced NDT Services Europe
: We have been commisioned to keep a database for Owner Users to source Advanced NDT Services. We are particularly interested to hear from people who provide servcices such as AE, TOFD, Digital Radiography, Guided Wave UT Etc. in Eastern Europe or areas of the Former Soviet Union (Kazakstan, Azerbaijan etc). If you contact us we would be most interested to hear from you.

Dear John,

We, Rosen Inspection Technologies BV, are very interested in this database you are going to setup. We would like somemore info about this


Hope to hear from you


Best Regards
Rosen Inspection Technologies


Chris Broekmeulen

Phone +31-79-3630626
Fax +31-79-3615339


 
 Reply 
 
Amedeo Marino
Amedeo Marino
05:03 Apr-27-2000
Re: Advanced NDT Services Europe
: We have been commisioned to keep a database for Owner Users to source Advanced NDT Services. We are particularly interested to hear from people who provide servcices such as AE, TOFD, Digital Radiography, Guided Wave UT Etc. in Eastern Europe or areas of the Former Soviet Union (Kazakstan, Azerbaijan etc). If you contact us we would be most interested to hear from you.




 
 Reply 
 
Amedeo Marino
Amedeo Marino
05:05 Apr-27-2000
Re: Advanced NDT Services Europe
: We have been commisioned to keep a database for Owner Users to source Advanced NDT Services. We are particularly interested to hear from people who provide servcices such as AE, TOFD, Digital Radiography, Guided Wave UT Etc. in Eastern Europe or areas of the Former Soviet Union (Kazakstan, Azerbaijan etc). If you contact us we would be most interested to hear from you.


We provide advanced NDT services all over Europe if requested.
You can have a look at our website and contact us if matching the profile you are requiring.

Best Regards.

Amedeo marino



 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window