where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1299 views
Technical Discussions
Rene Krutzen
NDT Inspector,
Intero Integrity Services B.V., Netherlands, Joined Oct 1999, 4

Rene Krutzen

NDT Inspector,
Intero Integrity Services B.V.,
Netherlands,
Joined Oct 1999
4
04:39 May-15-2000
Sound velocity of Copper-Nickel alloy

I am searching for the longitudinal and shear wave sound velocities of a Copper-Nickel alloy consisting of 80% Copper and 20% Nickel. I have already checked many tables in books and websites without finding the values for this particular alloy. Any help or advise would be appreciated very much.

Rene Krutzen
Nuson Inspection Services bv



 
 Reply 
 
Mariah
Mariah
06:55 Nov-13-2000
Re: Sound velocity of Copper-Nickel alloy



 
 Reply 
 

Product Spotlight

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window