where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

5118 views
Technical Discussions
G. Ganesh Raju
G. Ganesh Raju
07:35 Feb-09-2001
Re: ndt jobs in japan
Dear Sir,

Myself had worked as Technical Manager in an NDT company in Gulf and has the expertise in handling various NDT Activities in the best possible ways and myself a Profession Quality Engineer/ Inspector will able to exceed your expectation in NDT and Inspection

Thanking You Sir

Truly Yours

G Ganesh Raju


 
 Reply 
 
Niels Aage Giversen
Niels Aage Giversen
03:10 May-23-2000
NDT-service companies in Japan


Vi are looking for a competent NDT-service company in Japan to perform UT and Mt.


 
 Reply 
 
Chris Broekmeulen
Consultant
Rosen Inspection Technologies, Netherlands, Joined Feb 2000, 3

Chris Broekmeulen

Consultant
Rosen Inspection Technologies,
Netherlands,
Joined Feb 2000
3
03:16 May-23-2000
Re: NDT-service companies in Japan
:
: Vi are looking for a competent NDT-service company in Japan to perform UT and Mt.

Dear sir,

You could contact our representative in Japan
JGC Plantech Co. LTD
Mr. Osamu Kakuta
+8145 7433378
Fax 081 45 7433379

Best regards
Chris Broekmeulen
rosen inspection technologies


 
 Reply 
 
Tsutomu Matsushima
Tsutomu Matsushima
06:13 May-23-2000
Re: NDT-service companies in Japan
:
: Vi are looking for a competent NDT-service company in Japan to perform UT and Mt.


Dear Mr. Chris Broekmeulen,

We are supplier for NDT instruments representing Karl Deutsch, IRT ScanMaster, IRIS, SilverWing and Zetec, etc. If you need supply of instrument, we can offer directly. Please visit our home page.

If you really need inspection services, we can introduce proper inspection vendours depend on application. If so, please let us know including application.

Regards;

Tsutomu Matsushima
Nihon Matech Corporation
TEL: 81-3-3221-7531, FAX: 81-3-3221-7249



 
 Reply 
 
SUJITH KUMAR
SUJITH KUMAR
05:41 Oct-20-2000
ndt jobs in japan
:
: Vi are looking for a competent NDT-service company in Japan to perform UT and Mt.




 
 Reply 
 
premananda behera
premananda behera
04:18 Nov-23-2000
Re: NDT-service companies in Japan
:
: Vi are looking for a competent NDT-service company in Japan to perform UT and Mt.




 
 Reply 
 
wase
wase
03:43 Aug-02-2001
Re: NDT-service companies in Japan
Pls send me e-mail addresses of NDT companies in Japan



 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window